Skip to content
New Tambour Pricing — Built to Beat the Competition
New Tambour Pricing — Built to Beat the Competition
Trade Program Talk Face to Face Testimonials Podcast Where to Buy
Ceiling Medallion, Two Piece (Fits Canopies up to 7 1/4")41"OD x 5 1/2"ID x 1 5/8"P Medallions - Urethane White River Hardwoods
}

Ceiling Medallion, Two Piece (Fits Canopies up to 7 1/4")41"OD x 5 1/2"ID x 1 5/8"P

Save 10% Save 10%
$466.40
$466.40 - $466.40
$466.40
$419.72
$419.72 - $419.72
$419.72
SKU MED1084-H
Email to Order
}

Estimated lead time — 7–10 business days, subject to inventory availability

Returns are F.O.B. Buyer — subject to a 20% restocking fee.

View Full Returns & Exchanges Policy

Need Help? Call 1-800-558-0119 or email sales@whiteriver.com

White River Hardwoods · Urethane Ceiling Medallions

Ceiling Medallion 41″ OD

SKU MED1084-H · Two-Piece · Fits Canopies to 7-1/4″

High-Density Urethane · Factory Primed · Made in the USA

41″ round ceiling medallion in high-density urethane, 5-1/2″ center opening. Two-piece — splits to install around an existing fixture without taking it down. Primed and ready for paint.

Two-Piece · Installs Around Existing Fixtures · Factory Primed · Cuts with Woodworking Tools

A medallion does for a light fixture what a frame does for a painting — it gives the eye a place to land, and the ceiling a reason to be looked at.

Product Details

Dimensions & Fit

SKU Outside Dia. Center Opening Projection Fits Canopy Pieces
MED1084-H 41″ 5-1/2″ 1-5/8″ up to 7-1/4″ Two

"Fits canopy" is the largest fixture canopy the center opening will clear. The center opening can be enlarged on site with a jigsaw or hole saw. Projection is how far the medallion stands off the ceiling.

Why High-Density Urethane

Hand-Carved Detail, Cast Weight

Hand-Carved Master

Every pattern begins as a hand-carved original modeled on historical designs. That master becomes the mold, so the relief is deep and the lines are sharp.

High-Density, Not Vacuum-Formed

Cast solid in high-density urethane foam. It reads like plaster and holds a fastener — unlike thin vacuum-formed "plastic" medallions.

Factory Primed

Arrives primed. Paint to match the ceiling, contrast it, or gild the relief.

Cuts with Woodworking Tools

Enlarge the center for a fan canopy or electrical box with a jigsaw or hole saw. Lightweight enough for one person to hang.

Technical Specifications

Key Facts

SKU

MED1084-H

Type

Two-Piece Ceiling Medallion

Shape

Round

Outside Diameter

41″

Center Opening

5-1/2″

Fits Canopy

up to 7-1/4″

Projection

1-5/8″

Material

High-Density Urethane

Finish

Factory Primed

Made In

USA

Installation

Step by Step

1

Kill the Power

Switch off the circuit at the breaker before touching the fixture or box.

2

Size the Opening

Confirm the fixture canopy clears the center opening. Enlarge with a hole saw if needed; the canopy hides the cut.

3

Dry-Fit & Mark

Hold the medallion to the ceiling, center it on the box, and pencil the outline.

4

Adhesive on the Back

Run construction adhesive around the back near the edge and around the center. Adhesive carries the weight.

5

Fasten Through the Relief

Press up, then set two to four finish screws through low points in the pattern into joists or the box. Countersink and fill.

6

Join the Halves

Butt the two halves at the seam, glue the joint, and fill the seam line with lightweight spackle before painting.

Trade Program

38% Trade Discount for Design Professionals

Architects, interior designers, builders, and contractors receive 38% off list on ceiling medallions. Apply once and your account is set for every order.

Apply for Trade Access

Care & Handling

Store flat until installed. Dust with a soft brush or vacuum attachment. Clean painted surfaces with a barely damp cloth; avoid solvent cleaners.

MED1084-H — 41″ two-piece ceiling medallion. White River Hardwoods urethane medallions.

Products cannot be returned without prior approval and must have a Return Goods Authorization (RGA) number. Under the following circumstances, products may not be returned for credit:

  1. Are marked on
  2. Are modified in any way
  3. Have been exposed to excessive sun or moisture
  4. Have sheetrock mud, primer, stain, "job site damage"
  5. Returned 60 days after invoice purchase date

Returns are F.O.B. Buyer and are subject to a 20% restocking charge. To receive credit for stock products, product must be received in re-sellable condition. Custom mouldings and custom woodcarvings are not returnable under any circumstances. If returned products are received damaged due to poor repackaging, no credit will be processed. It is imperative that items are not returned in their original packaging without a thorough inspection as more fill may be needed to boxes of carvings or additional wrapping for mouldings may be necessary to prevent return shipment damage. Please call  1-800-558-0119 and speak to our Customer Service Representative to request an RGA.

*Claims for packages marked "delivered" must be filed after 5 days and before 15 days from the date the package was marked "delivered." Claims for packages presumed to be lost (where the status is not "delivered") must be filed after 7 days (20 days for international) and within 30 days from the last checkpoint.

Shipping rates vary by product category — see the rate table on each product page. Residential LTL deliveries require capable help to unload. Inspect all shipments within 15 days and report damage immediately. Customer is responsible for all freight charges, including residential delivery fees and liftgate charges.

Full Shipping Policy →

Monday through Friday, 8:00 a.m. — 5:00 p.m. Central Standard Time

Phone: 800-558-0119

email: sales@whiteriver.com

1197 Happy Hollow Road
Fayetteville, Arkansas 72701 (map)
Toll Free: (800) 558-0119
Phone: (479) 442-6986
Fax: (479) 444-0406

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare